Barbecue Pork Ribs (Baby Back or Spare) - Recipe File (2024)

I have no idea. I don't have a smoker right now and the thermometer on my grill is a joke.

I linked to it within the article. Here is the link again:
Recipe File: Grilled Pork Chops

The spice rub is the first three photos of that recipe and the first recipe summary table at the bottom.

I've considered it, but in the ended decided not to due to technical reasons (i.e. laziness). Maybe sometime in the future when I'm not working full time and can spend the time I'd like to spend on this website.

Here's my offering of a firm favorite here.

Pork Spare Ribs, Ok the BBQ tag in this instance relates to the use
of BBQ sauce when initially marinated for an hour. Chinese Recipe
from a book that has been in the Family bookcase since i can remember.

Of course these must have my Fried Rice to go with them, lol

I,too, just recently found this site and find it is very informative. Who (or is it whom) ever came up with it deserves much credit and many thanks. I'm doing 2 racks of ribs as we speak.

Long Retired PE

. . . their bridges may sometimes fail, but their ribs are always infallible! LOL

Just kidding (I earned my right to kid fellow engineers over 45 years ago).

Seriously, your method for cooking ribs is impeccable, and your photography ain't none too shabby.

Thanks for the great post.

I smoke a variety of meats on a regular basis and noticed a few things. There's no smoke ring on the ribs. Did you get a good smokey taste Michael? A smoke ring forms when temps. are below 140°. So the longer the meat is under that temp., the stronger the smoke ring (when I compete or want to impress my guests with a nice smoke ring, I always throw the food in the smoker straight from the refrigerator). Since the ribs cooked in about an hour and a half, your temps. were definitely over 300° (my bet would be close to 350°). When using wood chips (which is rare, I use wood chunks mostly), I always foil and poke holes in the foil (and throw the foil ball over charcoal or lump wood). That way you don't get a lot of smoke in the beginning but rather a stream of smoke throughout the cook. A lot of the smoke is wasted when it lights up in the beginning. Instead of using your typical hickory or mesquite chips, try using fruit woods. Apple works wonders with pork and gives off a light smokey taste. All in all, the ribs look great.

Erik

Thanks Erik. There was actually a 1-2 mm light pink smoke ring on the ribs and plenty of smokiness (for my taste buds). The trouble with smoking on a grill is that a minimum amount of heat must be applied to the side with the wood for it to smoke and this heat carries over to the cooking side, so unfortunately, I can't get the temperature much lower in this particular setup and still have smoke.

I was looking for a great oven baked rib recipe when I came across your web site. I love the recipe...it sounds delightful. I want to cook this for my family while on vacation. However, there is no grill at the condo that we rented and so I would need to cook the ribs in the oven. We are leaving on 7/19. I am cooking for 12 hearty eaters. Would you recommend this for the oven and if so, what adjustments would you make?

Thanks a lot.
Debi

You don't want to smoke anything indoors. I recommend trying this recipe for oven baked spare ribs. Reduce the time a bit (maybe an hour) for baby back ribs.

You should have a pair of needle nose pliers in the kitchen as part of your kit anyway. It helps with not only membrane removal, but also for extracting bones from salmon fillets.

Jim (the post above), there are many water smokers out in the market that use water has a heat sink (some people think water is used to keep the meat moist, but I say otherwise [you can easily over boil chicken into something dry and gnarly]) so your theory can not be true. When doing small amounts of food (maybe a rack or 2 of babybacks or st. louis style ribs), I too, add water to my smoker in order to keep the temps. at a steady 225° (at the grate). Never once have I had an issue with lack of a smoke ring.

One thing I forgot to mention above is that I always rub pork right before throwing it on the smoker. I first salt the meat, wait about 15 minutes and then use a dry rub (the moisture that comes from salting the pork acts as a glue to help adhere the rub to the meat). If you let salt sit on pork for over a few hours (such as what Michael recommends above in his recipe), you risk the meat having a "hammy taste."

Erik

I do my ribs on a triple burner gas grill, utilizing one burner to provide the heat. As far as wood chips go, i take the flange above the burner, turn it over to create a metal "pan" and place my dry chips on it.

This flange heats up nicely and, since I have removed the portion of the grate that is above the burner, I can easily add more chips as needed when I rotate my ribs.

I use a drip pan under the ribs filled with apple juice, or wine, or whatever I feel like, and I spray my ribs about every half hour with an apple cider/apple vinegar mix.

I bought an inexpensive probe thermometer, skewer a potato with it, and place it where the ribs are to get a good air temperature reading right where the ribs are. mine holds a temp at the lowest flame setting of 217 degrees during an Arizona Summer. (hell I am already halfway there before I start....)

All in all I have been pretty satisfied with my ribs, but one day I have to make that leap and actually invest in a real smoker, probably a Weber Smoky Mountain (WSM) to start.

One more thing, I rub a small amount of mustard on my ribs before applying the rub to act as a glue. I do not think it affects the taste, and have seen this done at many BBQ competitions.

Nice job, Michael. keep the posts coming!

Dean

I am having a BBQ on July 4th and plan on serving spare ribs. I've used your oven recipe, throwing them on the grill just before serving, and they've turned out perfect. I am wondering if I can bake the ribs the day before, refrigerate them, then throw them on the grill to heat them up before serving. Do you think the texture or flavor would be compromised?

There are a lot of people coming and I would just like to do as many things as possible ahead of time. Thank you so much for your help!

The flavor and texture should be fine. I'd mostly be concerned about serving ribs that might have a cold piece of bone in it. This all depends on how long you plan on reheating over the grill. If you do a short grill time, then you might consider wrapping the ribs up in foil and setting them in the oven on the lowest temperature (or on the grill over indirect heat) for a thirty minutes to an hour to heat through (depending on how you stacked the ribs when you wrapped them up).

to an adroit & practiced rib griller, my "method" is pure heresy.
okay, I accept that - but "my way" works for me - you get to be your own grilling critic.

(note: the thread addresses baby back ribs and spare ribs - I don't do baby backs. not enough meat on the bones to make it worth the time, but that's just me. I look for the country style ribs - loosely spare ribs with the extra bit on top....)

(second note: we prefer "wet ribs" - if you're a dry rib, no compromises, exit thread now.)

ribs, comma biggies/thickies. my basic rub is kosher salt/pepper/garlic powder/onion powder/and I threaten the mix with cayenne pepper for zing. I'm not a burn off yo' lips guy, so I go light on the heat.

remove silver skin; I leave all the fat on the ribs - trim not, tastier more.

sprinkle ribs liberally and "rub in" - yeah, the rub in bit makes a difference....a thirty second step not to be omitted.

wrap the ribs in heavy duty aluminum foil - interior rib side _up_. that's a factor because the rub/seasonings needs to puddle around the bits you eat.

bake in an oven at 300'F for 2.5 hours in a pan but on a rack so heat gets to all sides/surfaces.

at the end of the bake cycle, the meat is cooked - to the point of falling off the bone. further handling requires wide implements - be prepared - picking up a rack by the <end> / < whatever> produces "pieces of rack"

my "finish" depends on the weather and to what degree of effort I'm prepared to exert.

prelim: remove ribs from oven, open. when unwrapping the rib racks, you'll find a bunch of water/liquid in the bottom of the foil. puncture foil, capture liquid.

mad method #1:

while the rib are resting, jack up the oven to max - 450'F-550'F - depends on what your oven will do. while the oven is heating, put the captured juices in a sauce pan, add a batch of your favorite bbq sauce, mix & reduce.

(note: everyone has their own favorite sauce - use yours for best results)

put the ribs back on the rack, into the hottest oven, continue for 20 minutes or so until the ribs are dry, then swab down the ribs with the sauce. continue to bake/cook for another 20-30 minutes.

mad method #2:
in the last 30 minutes of oven low temp cooking, fire up the grill. I'm a lump charcoal type. get it going hot and wild.

capture, add bbq sauce, reduce as above. put the racks on the grill - 5 minutes +/- per side. slather with sauce, cook 10-15 minutes until the sauce is gumming up crispy.

I've been to St Louis; been the the famous joint in the basem*nt that does only dry ribs (but the beer pitchers were good...) we still prefer wet ones. your preferences and mileage may vary.

I just found this site. I did a search for an explanation of the USDA beef ratings and yours was one of the hits. What I've seen so far looks great.

I know people have various different ways of making ribs fall off the bone, and they usually seem to involve slow cooking in the oven or something similar. I've got a way to do it entirely on the grill. So far I've only done this with baby backs.

I prepare the ribs in a similar manner to the way described by Michael Chu. I like to brush them with a little olive oil before I dry rub them, and then I stick them in the fridge overnight (or for a few hours that morning if it is a last minute plan). The dry rubs that I've used have been comercially available ones such as the Durkee or McCormick chicken/rib varieties, and I've been happy with the results. I'll have to try the one from the grilled pork chops recipe next time.

I grill exclusively over charcoal. I make a nice bed of coals and drop the pan as low as it will go to keep as much distance as possible between the meat and the coals. I also close up the vents most of the way to keep the heat low. My grill has a thermometer in the hood, and I try to keep it as low as I can. I cook directly over the coals, but I don't really have any problem with flare ups at these low heats, especially with the lid closed most of the time and the vents closed up most of the way. I think this is a much bigger problem with the constant flame of a gas grill. Cook the ribs on one side for about an hour (less if you can't keep the heat down enough to prevent burning), then do the other side for about an hour.

For this last part I usually try to warm the grill up a bit by raising the coals and/or letting it breathe a little more. I pour some apple juice in an aluminum turkey pan, and I usually cut the ribs in half and stand them up in a row in the pan. Cover up with aluminum foil and put it on the grill for at least an hour- the longer they are in there the more tender they will get. Make sure that the juice doesn't dry up if you leave it on there for a long time. The apple juice steams the meat, and I believe the acids in it help to break down the flesh and make it fall apart. The apple also adds to the flavor. This last part could also be done in an oven.

They are good as-is if you like them dry, or with a bbq sauce of your liking.

I used your recipe to make ribs at home for the first time and they worked out great. The family raved about them.

Thanks for sharing your hard work.

Dave

I'm on my 2nd go around today using this method for Ribs. I had never BBQ'd ribs before and found this site about a month ago, the ribs turned out pretty tastey (though I didn't love the cut of meat.) So now I'm trying to educate myself about where to find better cuts of meat, really need to find an actual butcher around here, and ready for round two!

Thanks for the very thorough walk through and the pictures are outstanding.

-Ed

This is my first time making ribs and I plan on using this recipe this weekend.

I was wondering what temperature the grill should be at? I have a 3 burner gas grill with a built in thermometer. Low, medium, or high heat could also help. I am worried about over/under cooking the ribs.

Go low. If possible put the ribs over an area where the burner can be turned off and use indirect heat. Don't worry about undercooking - just keep them cooking until the meat shrinks back from the bones and a thermometer registers somewhere around 180F.

Wow, thank you for this. Been a while now, and your still getting comments! Good job!
Anyway, having scorched every attempt at BBQ ribs, I thought I'd try looking up a method on line and found yours! It was an eye opener. I loved the descriptions and pictures, and I just realized it is on a site titled Cooking for Engineers! That explains everything! As a former mechanical engineer, and now working in the field of Metrology, I was thinking to myself as I read it, this is the kind of guy we need working for us writing calibration procedures for ISO certification, haha.

This sounds great, can’t wait to get started, thanks again.

at 197'F the meat was definitely overcooked.

the usual recommended temp for pork is 160'F - but I hardly ever go that high, as I prefer a moister cut.

too high a temp -
or
too long -

time&temp are related - and certainly smoking in the rub warmed the meat - the 225-240'F temp works for me, I'd check the internal temp at about 45 minutes and see how the ribs are doing.

good luck!

I usually increase the temperature on the grill to thicken up the glaze quickly.

Thanks for the recipe. I was doing home improvement, forgot about the sauce, and over-reduced it by a bit. I still liked it, although I might tweak it a bit. Maybe a tiny bit more molasses and less tomato or ketchup? I love the spiciness.

The grilling technique worked well for me. Just under 2 hours. Still getting used to my new BBQ. Seemed to cook a little more at the top that the bottom, so I flipped in rib rack halfway through.

My BBQ thermometer said 240 and my surface therm said about 225. Got some smoke from my box for a while but then I left it and I think it stopped. Need to maybe move my smoker box directly over the flame.

I have cooked (or tried to,) Spare Ribs many times on the propane Webber BBQ and have had mixed results. Mostly not good, over / under cooked and always charred.
Yesterday I used a slight variation of this recipe and the results were spectacular ! I used a rub (no hot spices, wifee can't handle anything hot) Please no jokes.....;) , then smoked the ribs for about 2 hours with apple / hickory chips mix in an electric smoker 170*(Big Chief) then tented them with aluminum foil on a raised cake cooling rack on a cookie sheet with apple juice underneath, in a 300* oven for 2 1/2 hours. I slathered them with homemade BBQ sauce for the last hour uncovered, which set the sauce to a rich sticky glaze. Removed them and wrapped them tightly in the foil I used to tent them. Let stand for ~45 minutes.
The best ribs I've ever cooked, maybe the best I've ever eaten. Firm Juicy Satisfying Meaty Smokey & Sweet, everything you look for in a good rib.
Superb, simply Superb!

Thank you for sharing your recipe, It's very similar to the one found in "The Best of the Test Kitchens" cook book. Awesome book BTW.

Ron

Anybody old enough to remember what Mom's pork ribs tasted like 50 years ago?
OMG, please go to http://cawcawcreek.com/. Their heirloom pig strains go back to the Spanish colonization of America. They're also allowed to forage and pasture. Want to impress? Most of you have never tasted pork like this. Pork used to have a good deal of fat. These ribs do also.
BTW, the pork chops will bring tears to your eyes. No, I don't work there. Anyway here's how I do my ribs as of today:

Bradly Smoker - set to 230 degrees - two hours worth of hickory briquettes. Vent wide open.
Pull ribs from refrigerator and apply your favorite rub. I use Jack's Old South. www.jacksoldsouth.com
Let ribs come to near room temperature with the rub on them. No, I don't take the membrane off the inside.
Put ribs in heated smoker and walk away for 3 1/2 - 4 hours. Yeah, just walk away. There is so much fat on these, that it's much more difficult to dry them out.

If you insist on sauce (I just use it for dippin'), sauce and re-heat in oven broiler or on the grill. Not too hot, you don't want to burn the sugar in the sauce.

Prior to finding this pork, I'd tell myself every time I went for BBQ in a restaurant, "I can make ribs as good as these (maybe)." Now, there's no doubt, I can make ribs better than I've ever tasted in a restaurant. I have to admit, I've never had them in St. Louis or Memphis though.

I don't seem to have any wood chips and would still like to grill the spare ribs I have. Other than not having a smoky flavor, will this work? Should there be any changes to the recipe?

THis looks amazing and can't wait to try it.

>>will it work

yes - no problem.

the "flavor" wood chips bring the smoke-taste - but not much heat/etc.

I read the following tip from an old cookbook from the 1960's, but the recipes date back to the 1600's and earlier. Unfortunately, we are traveling so I don't have access to cookbook or the title, but I do remember the "key" to the most tender and moist "fall off the bone" ribs ever. No matter your preference for sauce - do your own thing.

The "key" to the baking and staying moist: Bake the ribs in slow 225 dg oven on broiler rack pan (that comes with every oven). In bottom of drip pan add an inch of hot water. Bake the ribs for about 4 hours depending on size of rack. Make sure the water remains in the base of the pan. Water should NOT touch the meat baking on the broiler rack pan. This moisture added of course keeps the ribs in a roasting yet moist environment, but never "boiling" it, which should never be done.

Remove ribs with pan from oven. Increase oven heat to 450 or 500 dg.

Pour off the water and dripping collected in bottom of broiler/roaster. This gets rid of most of the fat that's cooked off. Baste ribs well with favorite BBQ sauce - we like Stubbs of Cattelmans which are more natural, less sugars & no High Fructose Corn Syrup or wheat for gluten-free - and delicious. Also we make our own, but Stubbs is easier.

Roast on high (450-500 oven) for 30-40 minutes. Place membrane side up for first 15-20 minutes, meaty side up final 15-20 minutes. Baste when flipping to next side or more often if you prefer.

Remove from oven when crust is to your liking. Let ribs "rest" ten minutes to set the meat before cutting apart. You can add additional heated BBQ sauce to your ribs for serving, of course.

These are the most tender ribs you'll ever eat.

>>The "key" to the baking and staying moist:

ain't that the truth. and it applies to many many things - whole chicken, beef roasts, pork roasts, (ovened) pork chops - etc.

I am fortunately now to have "time in the kitchen" - so I've gone to the low & slow method for pretty much any of it. obviously if you get home at 5:30 PM and want to eat dinner, 2-3-4 hours of oven time is not a reality - you have to jack up the heat and cook faster.

but roasted chicken - 3 hrs at 245'F followed by a brief skin brown&crisp at 500'F - no comparison.

Post a comment on Barbecue Pork Ribs (Baby Back or Spare)